• #

10/100M Fiber Media Converter Multimode Dual Fiber External Power Supply

访问量: 15


The media converter transform the transmission media of Ethernet signal from CAT5 to optical fiber.

it can extend  the transmission distance to several kilometer or hundred kilometer.sing media converter

is a economical solution to achieve long distance transmission base on current status.



1.Built in a 2-port switch:
--Pass all packets without address and CRC check (optional);
--Supports modified cut-through frame forwarding for low latency;
--Supports pure converter mode data forwarding for extreme low latency;
--Supports flow control for full and halt duplex operation;
--Bandwidth control;
--Forward 1600 bytes packet for management;
--Optional forward fragments.

2. Supports 100Base-FX standard;
3.Built in 128Kb RAM for data buffer;
4.Supports auto MDI-MDIX function;
5. Supports link fault pass through function (LFP);
6. Supports for end fault function (optional);
7. LED display for link/activity, full/half, 10/100M
8. Support EEPROM configuration (optional);
9. the longest transmission distance reach 120 kilometers;






 Access mode



IEEE802.3 10Base-T Ethernet, IEEE802.3u,100Base-TX/FX Fast Ethernet, IEEE802.3x Flow Control



 Transmission distance

Dual-fiber Multi-mode: 2 km;

Dual-fiber single mode: 20/40/60/80/100/120 km;

Category-5 twisted pairs: 100m


One RJ45 port:

Connecting STP/UTP category-5 twisted pairs, EIA568A/B

One optical port:

Multi-mode Dual-fiber: SC or ST (50/125μm or 62.5/125μm)

Single mode Dual-fiber: SC or FC (9/125μm)

 Conversion means

Store and Forward mode or Cut-Through mode

 Buffer space

Built in 128Kb RAM for data buffer

 Flow control

Full duplex: flow control;

Half duplex: back pressure




 100,000 hours

 LED indicator

 POER (power supply), FX LINK/ACT (optical link action)

 FDX (full duplex), TX LINK/ACT (TP cable link/action)

 TX 100 (TP cable rate 100M), FX100(fiber cable rate 100M)

 Power supply

 External: AC90~264V/DC100~380V input, 5V1A output

 Power consumption

 <40W (the chassis at full load), < 2W

 Operating temperature


 Operating humidity


 Maintaining temperature


 Maintaining humidity

 5% ~ 90% non-condensing


 71mm (W)×94mm (D)×26 mm (H) (external power supply)