#
  • #

10/100M Fiber Media Converter SC singlemode Dual Fiber,25KM ,external power supply 5V1A

马上咨询
访问量： 13

MAIN DESCRIPTION

The media converter transform the transmission media of Ethernet signal from CAT5 to optical fiber.

it can extend  the transmission distance to several kilometer or hundred kilometer.sing media converter

is a economical solution to achieve long distance transmission base on current status.

 

FEATURES

1.Built in a 2-port switch:
--Pass all packets without address and CRC check (optional);
--Supports modified cut-through frame forwarding for low latency;
--Supports pure converter mode data forwarding for extreme low latency;
--Supports flow control for full and halt duplex operation;
--Bandwidth control;
--Forward 1600 bytes packet for management;
--Optional forward fragments.

2. Supports 100Base-FX standard;
3.Built in 128Kb RAM for data buffer;
4.Supports auto MDI-MDIX function;
5. Supports link fault pass through function (LFP);
6. Supports for end fault function (optional);
7. LED display for link/activity, full/half, 10/100M
8. Support EEPROM configuration (optional);
9. the longest transmission distance reach 120 kilometers;

 

STANDARD

IEEE802.3 ETHERNET STANDARD
IEEE802.3u FAST ETHERNET STANDARD


Parameter

 Specifications

 Access mode

10/100Mbps

 Standard

IEEE802.3 10Base-T Ethernet, IEEE802.3u,100Base-TX/FX Fast Ethernet, IEEE802.3x Flow Control

 Wavelength

850nm/1310nm/1550nm

 Transmission distance

Dual-fiber Multi-mode: 2 km;

Dual-fiber single mode: 20/40/60/80/100/120 km;

Category-5 twisted pairs: 100m

 Port

One RJ45 port:

Connecting STP/UTP category-5 twisted pairs, EIA568A/B

One optical port:

Multi-mode Dual-fiber: SC or ST (50/125μm or 62.5/125μm)

Single mode Dual-fiber: SC or FC (9/125μm)

 Conversion means

Store and Forward mode or Cut-Through mode

 Buffer space

Built in 128Kb RAM for data buffer

 Flow control

Full duplex: flow control;

Half duplex: back pressure

 BER

<19-9

 MTBF

 100,000 hours

 LED indicator

 POER (power supply), FX LINK/ACT (optical link action)

 FDX (full duplex), TX LINK/ACT (TP cable link/action)

 TX 100 (TP cable rate 100M), FX100(fiber cable rate 100M)

 Power supply

 External: AC90~264V/DC100~380V input, 5V1A output

 Power consumption

 <40W (the chassis at full load), < 2W

 Operating temperature

 -10~55ºC

 Operating humidity

 5%~90%

 Maintaining temperature

 -10~55ºC

 Maintaining humidity

 5% ~ 90% non-condensing

 Dimensions

 71mm (W)×94mm (D)×26 mm (H) (external power supply)