Main Description
It belonged to the switch of 2000series,2 ports for 1000 Base SFP ,LC or SC,FC,ST, single mode and multi mode, single fiber
and dual fibers can be selected;the max transporting distance can reach 120km, It adopts high quality network switch chip,
and its all ports support non-blocking, across the packet forwarding; it is very suitable for data communication,video monitoring
and relay transmission equipment during to flexible and simple usage.
Technical parameters
(1) Operating standards:IEEE802.3/u/z/ab,10/100/1000Base-T and 1000Base-SX/LX
(2) Flow control
Full Duplex: IEEE802.3x flow control
Half duplex: back pressure flow control
(3) Connector: UTP: RJ-45:10/100/1000Mbps; SFP slot: 1000Mbps
(4).Ultra-low time-delay date transmission, completely transparent to the network protocol
(5).Port support IEEE802.X VLAN, port monitoring.IPV6 port monitoring flux is 4K,base on MARC`s Trunking
(6)Effectiveness of automatic link transfer
(7).Support for spanning tree and loop detection,IGMP,MLD
(8)Bult-in 9720Bytes long data packet
(9) Cable: UTP: Cat.5 or 6 UTP (the max distance up to 120m)
Multimode Fiber:50/125,62.5/125μm (the max distance up to 2KM)
Single mode Fiber: 9/125μm (the max distance up to 120km)
(10).Support 2 ports for SFP/FC/SC, to feel free to select optic modules for SFP/FC/SC to achieve single/multi mode or different transporting distances.
(11).Support hot-swappable, plug and play
(12) LED: PWR,F1 Link/Act,F2 Link/Act;TP1~TP4 Link/Act,TP1~TP4 100,TP1~TP4 1000;
Dynamic feedback the status for link connection and fault detect.
Parameter | Specifications |
Access mode | 10/100/1000Mbps *4 |
Standard | IEEE802.3 1000Base-T Ethernet, IEEE802.3u,1000Base-TX/FX Fast Ethernet, IEEE802.3x Flow control |
Wavelength | 850nm/1310nm/1550nm |
Transmission distance | Multi-mode Dual-fiber: 2 km or 550m; Single mode Dual-fiber: 20/40/60/80/100/120 km; Single mode Single fiber: 20/40/60/80/100/120 km Category-5 twisted pairs: 100m |
Port | RJ45 port: Connecting with STP/UTP category-5 twisted pairs Optical port: Multi-mode: LC (50, 62.5/125μm) Single mode: SC or FC or LC (9/125μm) Single mode Single fiber: SC/FC/LC (9/125μm) |
Flow control | Full duplex: flow control; half duplex: back pressure |
Error rate | <10-9 |
MTBF | 100,000 hours |
LED indicator | POWER (power supply); FX LINK/ACT (fiber link/action) FDX (FX full duplex), FX1000 (fiber rate 1000M) |
Power supply | DC5V 2A (external) |
Power consumption | 3.5W |
Operating temperature | -10~55ºC |
Operating humidity | 5%~90% |
Maintaining temperature | -10~55ºC |
Maintaining humidity | 5% ~ 90% non-condensing |
Dimensions | 180mm(W)×100mm(D)×26mm(H) (external power supply) |