#
  • #

Fiber Switches with 2*1000M SFP+4*10/100/1000M , SFP slot ,External power supply

访问量: 3

4 ports and 2 SFP ports Gigabit ethernet optical fiber switch: 

It belonged to the switch of 2000series,2 ports for 1000 Base SFP ,LC or SC, single mode and multi mode, single fiber

and dual fibers can be selected;the max transporting distance can reach 120km, It adopts high quality network switch chip,

and its all ports support non-blocking, across the packet forwarding; it is very suitable for data communication,video monitoring

and relay transmission equipment during to flexible and simple usage. 

 

Technical parameters

(1) Operating standards:IEEE802.3/u/z/ab,10/100/1000Base-T and 1000Base-SX/LX

(2) Flow control

Full Duplex: IEEE802.3x flow control

Half duplex: back pressure flow control

(3) Connector: UTP: RJ-45:10/100/1000Mbps; SFP slot: 1000Mbps

(4).Ultra-low time-delay date transmission, completely transparent to the network protocol

(5).Port support IEEE802.X VLAN, port monitoring.IPV6 port monitoring flux is 4K,base on MARC`s Trunking

(6)Effectiveness of automatic link transfer

(7).Support for spanning tree and loop detection,IGMP,MLD

(8)Bult-in 9720Bytes long data packet

(9) Cable: UTP: Cat.5 or 6 UTP (the max distance up to 120m)

Multimode Fiber:50/125,62.5/125μm (the max distance up to 2KM)

Single mode Fiber: 9/125μm (the max distance up to 120km)

(10).Support 2 ports for SFP/FC/SC, to feel free to select optic modules for SFP/FC/SC to achieve single/multi mode or different transporting distances.

(11).Support hot-swappable, plug and play

(12) LED: PWR,F1 Link/Act,F2 Link/Act;TP1~TP4 Link/Act,TP1~TP4 100,TP1~TP4 1000;

Dynamic feedback the status for link connection and fault detect.


Parameter

 Specifications

 Access mode

 10/100/1000Mbps *4

 Standard

 IEEE802.3 1000Base-T Ethernet,

 IEEE802.3u,1000Base-TX/FX Fast Ethernet,

 IEEE802.3x Flow control

 Wavelength

 850nm/1310nm/1550nm

 Transmission distance

 Multi-mode Dual-fiber: 2 km or 550m;

 Single mode Dual-fiber: 20/40/60/80/100/120 km;

 Single mode Single fiber: 20/40/60/80/100/120 km

 Category-5 twisted pairs: 100m

 Port

 RJ45 port:

 Connecting with STP/UTP category-5 twisted pairs

 Optical port: 

 Multi-mode: LC (50, 62.5/125μm)

 Single mode: SC or FC or LC (9/125μm)

 Single mode Single fiber: SC/FC/LC (9/125μm)

 Flow control

 Full duplex: flow control; half duplex: back pressure

 Error rate

 <10-9

 MTBF

 100,000 hours

 LED indicator

 POWER (power supply); FX LINK/ACT (fiber link/action)

 FDX (FX full duplex), FX1000 (fiber rate 1000M)

 Power supply

 DC5V 2A (external)

 Power consumption

 3.5W

 Operating temperature

 -10~55ºC

 Operating humidity

 5%~90%

 Maintaining temperature

 -10~55ºC

 Maintaining humidity

 5% ~ 90% non-condensing

 Dimensions

 180mm(W)×100mm(D)×26mm(H) (external power supply)